欢迎使用媒体计时器应用程序。
Welcome to the application media timer's.

现在，在本练习中，我们将了解如何在实际应用中使用计时器的研发。
Now in this exercise We'll see how we can use the R&D of timers in practical applications.

因此，我们有一个小演示，向您展示如何使用计时器填充和排水，因此我们有一个 tangan，它开始填充泄漏率，我们可以使用墙壁排水，我们将根据时间激活这些电话。
So we have a small demonstration to show you how to fill and drain that down using timers so we have a tangan which began to fill the leak rate and we can drain that using the wall and we're going to activate these phones based on time.

所以我们对此有一些目标。
So we have some objective in that.

那么让我们继续这个应用程序。
So let's proceed to this application.

所以，是的，使用定时器填充灌浆罐，这样我们工厂里又出现了这种黑暗的环境。
So yeah filling ingraining tank using timers so we have this dark environment again in factory.

并且库存配置为数字模式，因此我们在本练习中有模拟和数字两种模式。
And the stock is configured with digital mode so we have two modes analog and digital in this exercise.

多看看数字。
See the digital more.

那么就让我带你去看看环境吧。
So let me take you to the environment.

这就是我的坦克吧。
So this is my tank right.

所以我们这里有很多驱动传感器。
So what we have here many actuates sensors.

这是我的。
This is my.

因此，如果我启动这面墙，就会填充液体和堆栈。
So if I actuate this wall this is fill the liquid and the stack.

这是我在数字模式下的填充墙。
That's my fill wall in the digital mode.

它是一个数字执行器，可以打开或关闭。
It's a digital actuator it would be just on or off.

好吧，那么在这里您将看到一个线性刻度，您可以在其中看到当前液体的实际液位。
All right then here you will see a scale a linear scale where you can see the actual level of the liquid right now.

而这些都是零。
And these are this is zero.

这是我的出院权。
Here we have this is my discharge right.

因此，如果我为所有这些放电激活此功能，则泄漏会从支架读取到地下。
So if I activate this for all this discharge the leak read from the stand to the underground.

这里我们有一个面板，在这个面板上我们有一个紧急停止按钮，我们有一个停止按钮，然后我们有一个自动手动选择。
And here we have a panel on this panel we have an emergency stop we have a stop button then we have an auto manual selection.

所以一些指标为灌浆，然后灌浆和沥水。
So some indicators for filling graining filling then and draining.

那么我们必须做什么。
So what we have to do.

这就是我们的目标。
That's our objective.

回到演示。
Back to the presentation.

因此，第一步是分配输入和输出，因为这个原因和我们所做的最后一项义务，您已经看到我们已将一些板和输出分配给您的工厂。
So the first step is to assign the inputs and outputs so as this cause and the last obligation we do and you have seen that we have assigned some in boards and outputs to your factory.

这一切都是在上帝面前。
All this in the face of God.

因此，我们通过已知的 0.08 评级对 0.1 止损对 0.2 紧急情况的 0.3 Mandl 或五分之二点四的感觉。
So what we have we have a feeling by the known 0.08 rating on 0.1 stop on 0.2 emergency's 0.3 Mandl or two point four in five.

Dismantle Ardo 是一个选择器开关，有两个输出，在语音填充的上半部分表示放电 Voll 和钻入贫民窟，我们有四个输出。
Dismantle Ardo is a selector switch which has two outputs and in the upper half of voice filling into filling indicate discharge Voll and drilling into ghettos we are four outputs.

因此，现在在这些步骤中，我们有两种手动模式，并且按照他们所说的选择并允许通过选择器开关切换到手动和自动模式，因此我们必须使用选择器开关来实现手动和自动模式。
So now in the steps we have two modes manually and out on to what they say is select and allow the mod by a selector switch to manual and auto So we have to use selector switch for a manual and auto mode.

正确的。
Right.

所以我的新电机将是 0.4 或 0.5，您首先会看到逻辑，并说通过 2.0 级舞蹈填充油箱，或者在自动模式下的手动模式下失败并手动排水。
So my new motor will be 0.4 or 0.5 which you see the logic first and say fill the tank by either 2.0 grade dance or failing and draining it manually in the manual mode in the auto mode.

我们必须将水箱注满 20 秒，然后将水箱排空 20 秒。
We have to fill the tank for 20 seconds and drain the tank for 20 seconds.

所以唯一的区别是在自动模式下，我们使用的是我的计时器，而更多的是我们不使用计时器。
So the only difference is in auto mode we are using a timer in mine on more we're not using the timers.

然后我们有停止和紧急按钮来停止填充和排水。
Then we have stop and emergency buttons to stop the filling and draining.

除此之外，我们还有一项义务在太空飞机上使用指示器进行填充和排水操作。
And along with that we have an addressing obligation at spaceplane the filling and draining operation using indicator.

因此，我们必须使用指示器来指示安装和排水操作，并且我们会闪烁。
So we have to indicate the fitting and draining operation using indicator and we that we'll be blinking.

好吧，我们可以花点时间眨眼。
All right so we can take some blinking time.

不知道其中的逻辑，所以让我们继续第四步。
Don't know the logic in that so let's proceed to the fourth step.

在开始之前，我们必须定义标签和海员的 TIAA。
Before moving to the start we have to defined the tags and seamen's TIAA.

所以这已经完成了，我们必须配置这个东西，并且它已经完成了更多，以便我可以向您展示我们如何做到这一点。
So this has been done already and we have to configure this thing and it's done more so that I can show you how we can do that.

所以，如果这是我的坦克，我会喜欢尼克。
So if this is my tank I would like Nick on that.

必须停下来。
Got to stop.

这是月球右腿的EDID配置，大部分是数字的。
This is the EDID moon right leg configuration mostly digital.

如果我转向模拟，那么我必须控制这个 Voyles 按比例填充数字中的根深蒂固。
If I move to analog then I have to control this Voyles proportionally filling ingraining in digital.

我必须只使用开断控制。
I have to just use on off control.

所以我现在我们正在进一步数字化，并且已经完成了更多工作。
So I and right now we're going digital more and additional more is done.

如果您看到这一点，请返回第一天之前的演示。
And if you see that go back to a presentation that's preceded the first day.

但销售额下降为零。
But sales fell down by either zero.

绿色的是我买的原样。
Green that I buy as it was.

所以这是一个手动移动。
So this is a manual move.

正如我之前提到的，在手动模式下是零点四，所以如果在这里接受这个诱饵，因为如果这个诱饵打开了，那么这就是我的逻辑的一部分，这里是手动逻辑。
So as I mentioned before in manual mode is zero point four so if take this bait here because if this bait is on then that's part of my logic is a manual logic here.

这都是手动逻辑。
This is all manual logic.

只有当这个赌注成立且有问题时才会运行。
This will be run only if this bet is on if there's ass off.

这没有任何意义。
This will not make any sense.

正确的。
Right.

所以他们说的是，我们已经使用了感觉的上升沿，这是我们用来锁住我的墙的按钮。
So what they say is we have used the rising edge of feeling this is the button the button which we use to latch my wall.

所以这是用来持续我的填充的按钮，这也是重置我的可放电的。
So this is the button this is used to last my fill was and this is also resetting my dischargeable.

因此，例如，正在进行填充或如果正在进行放电，我会用所述填充按下填充并重置放电。
So for example a filling is going on or if discharge is going on and I press the filling it with said the filling and reset the discharge.

是的，这是一种联锁的填充和排出。
Right so this is kind of interlocking filling and discharge.

与排水类似，但这是我的排水，我想要一个这是我的排水，但我们再次说过排水。
Similarly with that draining but and this is my draining I want one this is my but and again we have said that discharge.

这些是燃料棒。
And these are the fuel rods.

所以这是一个非常简单的基本手动模式，使用Interlochen按钮填充。
So this is a very simple basic manual mode using buttons you are Interlochen the filling in the.

如果您不使用计时器，这非常简单。
And this is this is pretty easy if you are not using timers.

因此，让我们继续执行第二步，即更多的纳尔维有一个计时器来填满时间。
So let's proceed to step two which is the order more Narvi are having a timer's fill the time.

0.04 20秒由你想要一个。
0.04 20 seconds by you want one.

现在我们处于自动模式。
Now we are in the auto mode.

因此，当自动模式打开时，手动模式将关闭，因为它是一个选择性开关，因此该电机将自动关闭。
So when the auto mode is on this manual mode is off because it's a selective switch so automatically this motor would be off.

因此，当您现在转到自动模式时，最后使用手动模式时我们有一个 0.0.0。
So when you move to the auto mode now the same by the end is using that in manual we have a 0.0.

尽管我们在同一个按钮上都有相同的按钮，但将再次设置我的声音，并且填充驱动器现在确实填充了此处使用的空白。
And although we all have the same button on the same button is going to set my voice again and the fill drive now does fill void that is used here.

正常情况下打开就可以了。
Normally open it.

因此，如果您处于自动模式并且按下此按钮，您的手机将位于椅子上，打开它自己的床。
So if you are in the auto mode and if you are pressing this button for the button your cell will be on the chair turn on it's own bed.

这将解决我的二聚体问题。
And this is going to address my dimer.

这是二聚体上的 D，所以这个 Volt 已经准时启动并启动了 20 秒，20 秒后我们使用了其外侧的上升沿。这是这里的输出，它将重置我的声音。
This is a D on dimer So this Volt is already on time and starts for 20 seconds and after 20 seconds we have used the rising edge of its outboard This is the output here which is going to reset my voice.

所以这里提到的这个声音是20。
So this voice this on for 20 which is mentioned here.

听起来很容易。
Sounds pretty easy.

这是一个如何使用计时器打开手表 20 秒的应用程序。
So this is the application how you can use a timer to turn on the watch for 20 seconds.

现在，我们已经为这一切的舞台节省了 20 秒的下一步，这一切都再次浮现在我们的脑海中。
Now the next step we have saved 20 seconds on for the stage of all of this is again in our mind.

但在这里我们使用了不同的计时器，只是为了向您展示它的应用程序。
But here we have used a different timer just to show you its application as well.

因此，我们使用此放电模型的上升沿，当我们再次设置和放电时，它会上升。
So we're using rising edge of this discharge model that it's rising as we're setting and discharge all again.

因此，当您按下按钮时，这个声音将会出现，并且再次出现该上升沿，然后我认为它会关闭，斯坦默将被激活。
So when you press the button this voice will be on and again that this rising edge then this I think it goes off the Stanmer will be activated.

好的。
OK.

所以当它完成时，需要 20 秒。
So when it complete it's 20 seconds.

好的，我们使用它的负边沿。
OK we use it's negative edge.

因此，当您按下此按钮时，该按钮就会打开。
So this is on the one when you press this is on.

所以这不会给你任何信号，但它可能是当基本娱乐停止时它停止的那一刻，它是负的，当钻石停止时，它是负的。
So this is not giving you any signal but it can be when basic entertainment goes off the moment time it goes off how it's negative which is negative which cancel when the diamond goes off.

所以这个负面广告将在格兰迪第二次之后出现，这将重置我的可放电。
So this negative ad is going to come after Grandi second which is going to reset my dischargeable.

好的。
OK.

所以唯一的事情是，如果你正在使用避蚊胺，你可以在二聚体上使用钻石，你必须做出这样的逻辑，如果你正在使用关闭时间，你是否必须使用正确的边缘，或者你是否已经做了这件事负面图像对于同一个应用程序。
So the only thing is you can either use the diamante on dimer if you're using DEET on you have to make logic like that do you have to use rightthing edge if you are using the off time or do you have do this thing negative image for the same application.

所以你已经理解了之前练习中的开球，因为这是莫托绿化坦克的命令。
So you have understood this teed off in the previous exercises for this was the order Morto green the tank.

现在接下来可以安全地使用停止紧急情况来开始填充和排水。
Now next is it safe to use stop an emergency to start filling and draining.

这真的很容易。
It's really easy.

我们让这些设备在紧急情况下停止，因为横幅上的触点和开关很抱歉。
We have these stop in emergency as the contacts and the switches sorry in the banner.

所以我们在联系人中使用它，因为当我按下这些按钮时，这会给我一个脉冲。
So we're using it in the contact because this is going to give me a pulse when I press these buttons.

所以今晚这辆巴士将解决这个问题，这是一种很好的平衡。
So this bus is going to resolve this tonight and this is kind of good and balance.

所以斯托巴特可以重置这两个，而且多布金也有紧急情况，他也有这两个。
So Stobart can reset these two and also emergencies Dobkin also he's had these two.

因此，每当您按下这两个并且有这两个时，输出就会关闭。
So whenever you press these two and you have these two the output will be off.

好的。
OK.

现在在闪烁操作之前我们必须设置时钟。
Now before blinking operation we have to set up the clock.

现在您知道我们有一些内部时钟，您可以将其用于许多应用程序，或者这是一个示例，您所要做的就是转到控件属性中的控制器属性。
Now you know we have some internal clocks which you can use for many of your applications or this is the one example all you have to do is you have to go to the controller properties in control properties.

在高级 CIA 场景中，您将进入“系统和时钟存储器”，在这里您只需选择此一项即可启用时钟存储器，然后您可以选择起始字节地址。
This imagery in the scene senior CIA you would go to System and clock memory here you have to just select this one enable the use of clock memory and then you can select the starting byte address.

我用了一百个，我的意思是你用了一百个。
I have used hundred I mean you use 100.

它会自动定义各种时钟。
It would automatically define various clocks.

所以在我们的例子中，我们需要停一秒，停一秒。
So in our case we need one second down and one second off.

好的。
OK.

如果您将其视为我网站的总时间，则将有两秒钟。
And if you see this as total time of my site there will be two seconds.

如果你按时间计算频率。
And if you take the frequency that is one by time.

因此，如果我的输出闪烁是你知道的一件事，一旦我上线，就需要两秒钟。
So if my output is blinking is one thing you know and once I get onto the line it's two seconds.

因此有一天，到 2:00 时，结果为 0.5，这就是我的频率。
So one day when and by 2:00 comes out to the 0.5 which is my frequency.

所以我必须选择第一为0.7。
So I have to select number one to 0.7.

0.5 你打算用什么作为眨眼的诱饵。
0.5 What are you going to use as bait for blinking.

那么让我们看看下一步如何使用指标来填充低估操作。
So let's see the next step blink the filling under-rating operation using indicators.

它应该是 bling bling 的填充和绿色指示器，所以你可以原谅我在这里的语言。
It should be bling bling filling and green indicator so you can excuse me for my language here.

嗯，我们这里有一个排放阀。
Well we have this discharge valve here that.

好的。
OK.

因此，当放电库打开时，我们就有了空间。
So when discharged vault is on we have the space.

现在，正如前面提到的，时钟将根据处理器运行的情况自动打开和关闭。
Now this bit as mentioned the clock will be automatically on and off based on the processor processor is running this little me on.

所以你不必控制它，但你只需在你的逻辑中添加这一点，这将自动成为一件事，唐。
So you don't have to control this but you just have to add this bit in your logic this will be automatically one thing Don.

一件事放在一件事上，一件事就足够了，这将继续下去，所以我们只是使用我们只是在 CD 中添加这一点，并与可放电的 CD 一起移动。
And one thing on one thing and one thing enough this will keep on going so we just use we just add this bit here in CDs with a dischargeable and moved in together.

因此请指出谁将眨眼，因为这会眨眼。
So indicate who will blink on and off because this will blink.

我们会看到，在逻辑中，类似地，在电影中，我们再次有相同的赌注，在这里填写，让我们下载和检查。
We'll see that in the logic Similarly in the film we have again the same bet here for the filling in here for let's download and check.

所以我已经下载了这个逻辑。
So I have already downloaded this logic.

我们只需检查一下即可。
We just have to check it.

我必须把事情办好。
I have to make it OK.

这是正在运行。
This is running.

这就是逻辑。
So here we have this is the logic.

所以现在你可以看到“结束但完成”是普通话。
So right now you can see that over but done is in Mandarin.

这就是这个位开启的原因。
So that's why this bit is on.

如果我将其设置为自动，则此位会自动关闭，因为我 0.4 已关闭，并且如果我转到我的阿姨那里，她将关闭，我的音频将打开。
If I make it to auto This bit is off automatically because I 0.4 is off and my audio is on if I get over to my aunt who will be off manage to be on.

好的。
All right.

那么我们先来测试一下手动逻辑。
So let's test the manual logic first.

所以数学上没有逻辑。
So in math no logic.

你所拥有的只是填充要发送给朋友的是和他说的。
All you have is filling is going to send the friend was and he said the of of.

因此，以您阅读新闻的方式来填写。
So in the manner you read press you're filling.

所以当我按下填充时，就会设置它。
So when I press filling this would be set.

这样就设置好了，您可以看到填充物已经消失，为什么它会闪烁，它会变成闪烁的灯，这意味着您知道它会自动打开和关闭。
So this is set and you can see that the filling is gone and why this is blinking it's brought down to blinking lights it means you know this is automatically on and off.

Findlay 的效果并不令人满意，并且再次闪烁红色。
Findlay's is unfulfilling and again it is blinking red.

这是一回事，这不太好。
It's one thing it's not OK.

所以你可以直观地看到正在发生的事情，并且可以感觉到。
So you can visually see that something is going on this is being felt.

我们就到此为止吧。
Let's stop it here.

当我停止停止按钮重置时，我的声音如此闪烁，因为该位已重置，所以它不会继续。
When I stop the stop button reset my voice is so blinking it's not going on because this bit is reset.

所以我的进程已经停止了。
So my process has stopped.

我们再往上走吧。
Let's move up again.

那人去排掉水箱里的水，以便排掉水，以便我们去战斗克里斯。
The man went to drain the water in the tank so to drain the water going to use I we go to the battle Chris.

我会看到我的水被排干，因为这条法律实际上已经制定了。
And I will see that my water is being drained because this law is actually set.

你可以看到这个水平正在下降。
And you can see that level is going down.

好的。
OK.

而且这种闪烁是为了绿色，因为这里有相同的逻辑，我们有 Spader 的红色闪烁，脱轨排水指示器闪烁。
And and this blinking is going on for greening because of the same logic here we have the Spader's on this is blinking red detraining draining indicators blinking.

太好了。
OK great.

所以这就是手动模式。
So this is the manual mode.

您也可以随时停止它。
You can also stop it whenever you want.

所以这是开始按钮。
So this is the start button.

你有一个梦想。
You have a dream.

只是为了向您展示紧急情况。
So just to show you that emergency.

它再次停止，但完全是紧急人才流失。
Again it stopped but it is the emergency brain drain completely.

好的。
OK.

所以这正在耗尽。
So this is getting drained.

一旦训练完成，我就会停下来。
And once it's fully trained then I will stop.

好的。
OK.

现在让我们进入自动模式。
Now let's move to the auto mode.

那么另一点逻辑就在这里。
So the other point The logic is here.

所以我们必须更加努力。
So we have to do it all the more.

通常我想从这里得到的都是现在发生的相同的事情，但是一旦你看到如果你去山上，我必须看到和听到很多这样的事情。
So often what I would like to get from here are what is on now the same but once you see if you go to the mountain and I have to see and hear this a lot.

这不会设置我的手表，因为它已关闭。
This will not set my watch because this is off.

所以我在这里使用相同的按钮。
So I'm using the same button here.

你说了瑟尔沃尔20秒。
You said that Thirlwall for 20 seconds.

所以我按下了填写。
So I pressed fill in.

你会发现填充正在进行，你可以看到时间到了。
And you will find filling is going on and you can see the time is here.

感觉很大，20秒后就开始计时了。
The feeling is said it's big has started the timer after 20 seconds.

如果我们认为您看到正在填充的时间正在进行 20，则这将自行重置，这将导致填充体积并且填充将正常停止。
This will reset itself if we reason the you see that the time is going on what is being filled for 20 it will reason to fill volumes and filling will stop ok.

这很容易。
This is pretty easy.

让我们转到自动模式下的排水部分，但我们有这个上升沿开始排水。
Let's move to the draining part in auto mode ingraining but we have this rising edge to start draining.

所以我在这里有上升沿。
So I have the rising edge here.

是时候让这个评级成为我的负担和平衡了，我们有一个计时器。
It's time that rating for this is my burden and balance that we have a timer.

因此，当我按下按钮时，公共汽车就会过来，它将为所有螺栓设置我的窗带，并且它将再次停止我的计时器，并且计时器将在它或其他任何事情之后关闭。
So the moment I press the button the bus will come which will set my sash for all the bolts and it will again stop my timer and timer will be off after it or anything.

然后钻石熄灭，第二次将产生负绒毛，重置我的放电。
And then the diamond goes off the second will have a negative fuzz is reset my discharge.

正如我之前所解释的。
As I explained before.

所以我在这里感到奇怪的是，限制令已生效，但 20 秒后它不会像这样发送。
So here I go crany that restraining order is active and after 20 seconds it won't be sent like this are.

好的。
OK.

通过眨眼，我们可以表明我们知道即将开始的过程是如何进行的。
And by blinking we are indicating how or the process is going on which is we know that's going to start.

您会注意到我们的水箱里有一定水位的水。
And you can notice that we have for you some level of water in the tank.

这是因为创建了培训流程。
This is because of the creating the flow of training.

它比地板填充物少。
It's less than the floor filling.

这就是这就是你知道的买它。
This is this is the you know buy it.

这是由我们在数字世界中开始改变的软件定义的。
This is defined by the software we we out in the digital world begin to change that.

但如果你更多地进行模拟，你可以改变排水和填充的流量。
But if you are in the analog more you can change the flow of draining and filling.

我们在后面的练习中会看到这一点。
We see that in later exercises.

因此，这就是我们如何控制水箱液位，我们可以在不使用计时器的情况下填充水箱液位并排空水箱。
So this is all about how we can control the tank level we can fill the tank level and drain the tank never using timers.

好的。
OK.

因此，如果您在休息室需要任何帮助，或者您可以放下我，您可以获得演示文稿的副本并建立目标。
So if you need any help in the lounge or you can put me down and you can get a copy of the presentation and builds the goal as well.

上诉法院的法庭运作良好。
The appeals court is well in the courts.

我们有任务要做。
We have a task to go.

您可以下载为 PDA 文件。
You can download as a PDA file.

非常感谢您的聆听。
So thank you so much for listening.

请参阅下一个视频。
See the next video.